this highly detailed simulation of the PA-28R Turbo Arrow III and Arrow IV has been developed by Just Flight's in-house team following comprehensive, hands-on research with a real-life Arrow III, G-BGKU, based at Conington Airfield.
The PA-28R Turbo Arrow III and Arrow IV are four seater, turbocharged piston-engine aircraft equipped with a retractable tricycle landing gear and constant-speed propeller – ideal for touring and instrument training.
First available in 1977, the Turbo Arrow III was the first turbocharged variant of the PA-28R Arrow, retaining the conventional tail of the Arrow III and a new cowling which housed the six-cylinder turbocharged engine. The Turbo Arrow IV followed in 1979 and featured the distinctive T-tail which was common amongst other Piper aircraft.
The aircraft are flown all around the world and this add-on reflects that global popularity. The product features ten liveries from the USA, UK, Germany, Australia, Switzerland, Italy and the Czech Republic.
MODEL
-
Accurately modelled PA-28R-201T Turbo Arrow III and PA-28RT-201T Turbo Arrow IV, built using real-world aircraft plans
-
Numerous animations including passenger door, baggage door, cockpit window, sun visors and oil cover
-
Ground equipment including chocks and tie-downs
-
4096 x 4096 textures for the highest possible texture clarity
-
Bump and specular mapping used throughout the aircraft for a truly 3D feel
COCKPIT
-
A truly 3D virtual cockpit right down to accurately modelled seat belts and screw heads - every instrument is constructed fully in 3D with smooth animations
-
Cockpit textures feature wear and tear based on reference photos taken in the real aircraft to produce an authentic environment
-
Different colour schemes for the Turbo Arrow III (grey/blue) and Arrow IV (tan/brown)
-
Interactive engine start checklist
-
Interactive checklists for every stage of flight
-
Panel state system which will automatically save the panel state whenever a flight is saved and reload the panel state whenever that flight is loaded
-
Aircraft configuration system that will allow you to choose between 'cold & dark' or 'ready for take-off'
-
Fully functional and comprehensive IFR-capable avionics fit including:
-
KMA 20 audio selector unit
-
KX 170B COM 1 / NAV 1 radio
-
KX 175B COM 2 / NAV 2 radio
-
KN 62 DME unit which can display information from NAV 1, NAV 2 or its own inbuilt receiver (NAV 3)
-
Piper Autocontrol IIIB autopilot unit with navigation, heading and roll hold
-
KT 76A transponder unit
-
KR 85 ADF unit with ADF/ANT/BFO modes
-
GPS 100 unit
-
Interactive logbook panel for logging your flight details (FSX and P3D v1-3 only)
-
Flight computer panel with useful information such as fuel burn, endurance, speed and wind speed/direction
-
Yoke-mounted flight timer/clock
-
Independently operated left and right (standby) altimeter
-
Flight1 GTN and GNS integration in the virtual cockpit (Flight1 GTN/GNS sold separately)
AIRCRAFT SYSTEMS
-
Custom-coded fuel system, including the option to have automatic switching of the fuel tanks for use on those long distance cross-country flights
-
Custom-coded electrical system with functional circuit breakers
-
Realistic landing gear system with emergency release
-
Functioning alternate air and static source controls
-
Failures including spark plug fouling, limited battery life, vapour lock and more
LIVERIES
The Turbo Arrow III is supplied in the following five paint schemes:
-
N48427 (USA)
-
D-ERMT (Germany)
-
G-OBAK (UK)
-
HB-PMB (Switzerland)
-
VH-LLA (Australia)
The Turbo Arrow IV is supplied in the following five paint schemes:
-
D-EAIV (Germany)
-
G-BOGM (UK)
-
OE-KFT (Italy)
-
OK-MAN (Czech Republic)
-
N3023K (USA)
OTHER
-
Realistic and accurate flight dynamics based on real world performance and handling data, and input from Turbo Arrow pilots
-
Authentic sound set by Turbine Sound Studios (TSS)
-
Custom sounds for switches, doors, gear warnings and more
-
Comprehensive manual with panel guide and performance data
-
PSD Paint Kit included so you can create your own paint schemes
Requirements:
-
Flight Simulator X (Acceleration, Gold or Steam Edition required) or Prepar3D v1-v5
-
2.0GHz or any Dual Core
-
2GB RAM
-
1GB graphics card
-
Windows 10 / 8 / 7 . Vista / XP (32-bit or 64-bit)
-
2GB hard drive space
|